Coatings


&

We Offer Great Services such as:
  • Professional Advice
  • Color Matching
  • Color Consulting
  • Coating Submittal
  • Delivery
  • Equipment Rental

You need Flash player 8+ and JavaScript enabled to view this video.

 

Aura with Color Lock
See color like you've never seen it before - discernibly truer, richer hues that bring a new dimension of beauty to your home. Experience premium performance in a paint with incredible hide (never more than 2 coats), and fade and color rub-off resistance.

 

 

Specifically formulated for ceilings, Waterborne Ceiling paint is ultra flat, hiding common ceiling imperfections for a look that is virtually flawless. Benjamin Moore Ceiling paint provides ample open time to ensure minimal lapping, has minimal spatter, and dries quickly for fast recoats.  

 

Benjamin Moore Chalkboard Paint, available in any color, lets you turn virtually any interior surface into an easy-to-clean chalkboard. It goes on smoothly, just like other paints—and with lots of fun colors to choose from, the blackboard no longer has to be black.  

 

Regal Select offers the premium performance and smooth application you've come to expect from our classic paint, with the added benefits of cutting-edge new technologies. Thanks to our proprietary waterborne resins and zero VOC colorants, Regal Select is both a paint and primer in one advanced formula.

Natura Waterborne Interior Paint continues Benjamin Moore's commitment to providing the most environmentally friendly paint. Natura Paint emits lower total VOCs than other national zero-VOC products on the market, all without compromise to performance or color selection. Natura is truly "Green Without Compromise®."  

 

ADVANCE offers the application and performance of traditional oil paint in a waterborne formula that cleans up with soap and water. It is a 100% alkyd formula water-dispersible alkyd developed with proprietary new resins that keep VOCs low even after tinting. It flows and levels like a traditional alkyd with the extended open-time required to achieve high-end finishes. ADVANCE is available in unlimited colors, giving you more ways than ever to achieve the perfect look on every job.

 

Benjamin Moore® Color Samples allow you to "try on" a paint color before you commit to the time and expense of painting an entire room. Interior designers and professional painters do a "brush out" when deciding on color. This entails applying paint to a small section of the wall or several walls to see how the color looks in the actual environment. By sampling a color at home, you'll get the most accurate sense of how the color will actually look in the room.

Each of our 16 oz. paint color samples covers approximately two 4' X 4' or eight 2' x 2' areas with two coats of paint. You can test a number of different colors at a time. You can also paint smaller test swatches on several walls to see how a particular color will look throughout a room under various lighting conditions.

Zero-VOC Ultra Spec 500 is a professional-quality interior coating designed to meet the needs of professional painting contractors, facility managers, and property managers. Available in a wide range of sheens and unlimited colors, professionals will appreciate its excellent hiding and touchup properties, good flow and leveling, easy application, and soap-and-water cleanup. 

Aura Exterior is the finest exterior paint Benjamin Moore has ever made. It combines the advantages of our resin technology and our Gennex® waterborne colorant system to deliver rich, full color and unprecedented durability. Aura protects against cracking, peeling and fading and is also mildew and stain resistant. Aura Exterior is available in thousands of colors.

Utra Spec EXT Paint is a professional-quality exterior coating designed to meet the needs of professional painting contractors, facility managers, property managers, and specifiers. It is ideal for exterior surfaces for which durability is critical. Available in thousands of colors, contractors will appreciate its superior coverage, adhesion, ease of application and easy soap-and-water cleanup. Tinted with Benjamin Moore's proprietary zero-VOC waterborne colorants, all of the finishes in this product line are low VOC.

 

Regal Select Exterior is a premium waterborne acrylic paint tinted on our patented Gennex platform. It delivers the classic application and superior performance you expect from the Regal name for your exterior jobs.

Benjamin Moore Premium Alkyd Exterior Stain is a complete selection of the finest stains and sealers. Available in a wide variety of premium quality products.

ARBORCOAT is the newest line of exterior stains from Benjamin Moore. With advanced waterborne technology, all ARBORCOAT finishes are easy to apply and offer superior protection while enhancing the texture and grain of exterior wood surfaces. It's available in a wide variety of opacities and colors, including a unique transparent and semi-transparent staining system.

Super Spec HP products are the most widely used coatings for the maintenance business and have been modified to offer additional protection and or application properties. DTM, direct to metal, products that play a dual role as both primer and finish. Available in alkyd or acrylic.

 

 

Super Kote 5000 is designed for commercial projects when getting the job done quickly is a priority. With low spatter and easy application, this premium-quality, vinyl-acrylic formula delivers dependable quality and productivity.

 

 

 

 

Super Kote 3000 is formulated to provide the necessary balance between performance and value, delivering good hide and a durable, washable finish. Ideal for new work or re-paints, including commercial, residential, and new construction projects.

 

 

 

 

 

 

Super Kote 1000 is a quality-grade, vinyl-latex paint with low VOCs that provides good dry hide on interior wall surfaces. Not intended for areas that require frequent washing, this value-maintenance finish is ideal for rental properties and commercial sites.

 

 

Coronado Texcrete WB Waterproofers are high build, low VOC, breathable waterproofing coatings, designed for application by the professional contractor to above grade concrete and masonry structures. These coatings are specifically engineered to be applied direct to concrete and masonry surfaces without priming. Texcrete WB coatings are designed to resist high ph surfaces and therefore can be applied direct to new concrete without extended curing and delays. These coatings are resistant to salt spray, wind driven rain (up to 100 mph), acid rain and UV light. The breathable, high build film allows moisture vapor to pass through, without blistering or causing a loss of adhesion. Available in various textures, these products do not require a primer / filler on smooth masonry surfaces.

 

 

Rust Scat Polyurethane Satin Enamel is designed as a rust preventative coating for ferrous metal. The rich satin sheen hides many surface imperfections, while maintaining the durability of hard enamel. It is easy to apply, has tenacious adhesion, has excellent wetting properties and exhibits an excellent appearance once cured. Use a barrier coat over zinc rich coatings.

 

 

 

 

 

 

 

 

 Rust Scat Semi-Gloss Acrylic Enamel is an interior-exterior finish, which is suitable for coating primed metal, wood or masonry surfaces. It is water thinned so it poses no objectionable odor. The acrylic resin provides excellent color and gloss retention as well as tenacious adhesion properties. This product is suitable for use in USDA inspected facilities.

 

 

 

Corotech Alkyd Urethane Gloss Enamel is formulated as a heavy duty, industrial enamel finish for interior or exterior surfaces. The surface wetting characteristics inherent in this product allows for application over marginally prepared surfaces. The ease of application and exceptional flow allows for an aesthetically pleasing finish, with excellent protective qualities. The urethane modification far surpasses the performance of straight alkyd formulations in exterior exposures.

 

 

Corotech Acrylic Semi-Gloss DTM is a high performance, one component, direct to metal acrylic finish formulated for application to a wide variety of metals and other substrates, either direct or as a UV resistant finish applied over primer. The coating performs very well in light to moderate exposurin industrial, commercial and institutional applications. This product out performs most “DTM” systems on the market, having far superior resistanceto moisture throughout the coating life. Additionally, the product is formulated with special inhibitors, which prevent flash rusting when applied to ferrous metals, and provides long term corrosion prevention throughout the coating life. The waterborne formulation ensures easy application, clean-up and use in occupied areas.

 

 

 

  Hot Trax Epoxy Fortified Acrylic Concrete and Garage Floor Paint is a high performance, ready to use acrylic floor coating that resists hot tire pick-up and marring common to driveways and garage floors. This finish seals and protects concrete from chemicals, water, oil and grease. Hot Trax is also ideal for use on exterior concrete, masonry, stucco, cinder block and brick. This durable low satin finish is resistant to cracking. This product can be walked on in 24 hours and vehicles can be parked on Hot Trax in 5 – 7 days.

 

 

WaterBlock Acrylic Masonry Waterproofer is designed to waterproof interior or exterior masonry surfaces such as basement walls, foundations, retaining walls, exterior masonry walls, etc. It is alkali resistant and provides positive sealing and waterproofing over bare concrete block, brick, stucco or tilt up concrete walls. No pre-mixing or surface pre-wetting is necessary with this product.

 

 

 

 

 

 

COROTECH® V341 Pre-Catalyzed Waterborne Epoxy is an extremely durable, easy to use, single component epoxy offering many of the high performance characteristics expected from the traditional two component epoxies without the odor, pre-mixing, pot life and application difficulties inherent in these products. This product is especially well suited for use in moderately severe exposures and high traffic areas subject to frequent cleaning. It is ideal for use in high traffic areas of commercial kitchens, cafeterias and bathrooms in facilities such as hospitals, schools and processing plants. It provides superior adhesion and abrasion resistance on a wide variety of substrates and can be used on most interior applications where maximum durability is required. It also has superior stain resistance as compared to similar products on the market. Excellent for use over previously painted wood trim, wallboard, plaster and primed or previously painted concrete, brick, cinder and concrete block.

Insl-x Fire Retardant Paint is a high-quality latex decorative, intumescent, fire retardant coating for interior ceilings, walls and trim. This product provides a high-hiding matte finish that retards flame spread by reacting to heat and forming a thick cellular char blanket (intumescence). By reducing excessive heat penetration, this product retards flame spread and minimizes smoke generation. It is suitable for primed or previously painted wood, drywall, cellulose tile, cured plaster, masonry and metal. It applies like a conventional latex paint, is low in odor, low in VOCs, and washes without spotting. 

Industrial Grade 2-Part Epoxies & Urethanes

100% Solids Epoxy Pre-Primer is a two component penetrating epoxy sealer. This product is formulated for use on clean, rusted steel where extensive surface preparation is needed, but not possible. The penetrating properties and extended dry time of V155 provides a method of reinforcing rusty steel surfaces, ensuring adhesion of subsequent coatings. This product also exhibits excellent penetration and sealing of masonry substrates. Can also be used as a barrier coat when applying high performance coating systems over existing alkyd coatings. Pre-Primer will amber and chalk if exposed to ultraviolet light.

Corotech V160 Surface Tolerant Epoxy Mastic is a high solids, surface tolerant epoxy formulated for professional use. This product is excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack. Is suitable for use for protecting concrete substrates in secondary containment applications ancan be used for immersion applications. Additionally, this primer is formulated to offer long-term rust prevention, and is excellent when used in a system with epoxy intermediates, immersion service epoxies, and other high performance topcoats. Available in White and Bases. This product is suitable for use in USDA inspected facilities.

Corotech V160 Surface Tolerant Epoxy Mastic is a high solids, surface tolerant epoxy formulated for professional use. This product is excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack. Is suitable for use for protecting concrete substrates in secondary containment applications ancan be used for immersion applications. Additionally, this primer is formulated to offer long-term rust prevention, and is excellent when used in a system with epoxy intermediates, immersion service epoxies, and other high performance topcoats. Available in White and Bases. This product is suitable for use in USDA inspected facilities.

 

Corotech V440 Waterborne Amine Epoxy is formulated to provide superior chemical, abrasion and impact resistance when compared to most conventional waterborne epoxies. The highly cross-linked film provides years of service in industrial and commercial applications and is particularly suited for use on concrete floors subjected to severe service conditions. The waterborne formulation produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly than solvent based polyamide epoxies. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling.

GarageGuard Water Based 2 Part Epoxy is a new generation water-based catalyzed epoxy which offers performance equal to traditional solvent based epoxy systems. It provides superior chemical, abrasion and impact resistance when compared to conventional waterborne epoxies. The highly cross-linked film provides years of service. GarageGuard® Water Based 2 Part Epoxy produces lower odor than solvent based epoxies, so this product may be applied in occupied areas, and is more user friendly. Additionally, this product may be applied to most generic coating types without the fear of lifting or wrinkling. This product is suitable for use in USDA inspected facilities.

 
Corotech V450 Acrylic Epoxy combines the long-term durability of traditional epoxies and the color and gloss retention of acrylics in a water clean-up product. It requires minimal surface preparation, and resists a wide variety of chemicals and exposures. In addition, it exhibits the abrasion resistant qualities of traditional epoxies, making it an excellent wall coating for high-abuse areas. A selection of gloss or semi-gloss catalysts allows for a choice of sheen levels, without sacrificing durability. It may be used self-priming, or with primers for maximum corrosion resistance. Apply on new, properly prepared substrates or over intact existing coatings.

Corotech V400 Polyamide Epoxy is designed for use in Food and Beverage Processing, Industrial Maintenance, General Metal Finishing and Fabrication, Chemical Processing, Industrial and Commercial Flooring and other areas requiring maximum impact and abrasion resistance. It's highly cross-linked film resists many chemicals and solvents, and exhibits excellent chemical and moisture resistance. It is resistant to dilute acids and alkali attack. Excellent for use on ferrous and non-ferrous metals. Also suitable for protecting concrete substrates in secondary containment applications and can be used for immersion and floor applications. Additionally, this product is formulated to offer long-term rust prevention, and is excellent when used in a system with epoxy intermediates, immersion service epoxies, and other high performance topcoats.

Corotech V430 100% Solids Epoxy Floor Coating is a two component, high build epoxy. It is formulated for use as a one coat application on interior concrete floors subjected to industrial chemicals and fumes (2 coats on new surfaces). This product can also be used in severe exposure applications subjected to heavy abrasion and vehicular traffic. This coating will fill many hairline cracks and superficial concrete defects, producing a smooth and aesthetically pleasing high gloss finish. This product is intended for use in industrial or commercial exposures and should only be applied by professional contractors, knowledgeable in the use of these types of coating systems.

Corotech V500 Aliphatic Acrylic Urethane is a multi-use, two-component Aliphatic Acrylic Polyurethane that provides excellent gloss and color retention, as well as excellent abrasion, chemical, and solvent resistance. It may be used anywhere a performance urethane is necessary for interior or exterior applications. This product is ideal as a non-sacrificial anti-graffiti coating in clear or pigmented colors when using a commercial Graffiti Remover. Complies with or surpasses formulation and performance requirements of MIL-C-85285.

Lenmar Woodworking Products

                        

ECH2O One Component Waterborne Urethanes combine the strength and appearance of traditional oil-modified polyurethanes, with many of the required properties of today’s environmentally friendly waterborne floor finishes.

ECH2O One component finishes are recommended for both commercial and residential applications. Principle benefits include superior flow and leveling properties, minimal streaking, bubbling, and grain raise. Additional benefits include fast drying, low odor, and rapid water clean-up. ECH2O One Component finishes have excellent penetration and adhesion to properly prepared interior wood surfaces. Its high solids content will provide lasting durability and protection. These finishes have a slight amber hue that adds a rich natural looking patina to the wood. Not recommended for use over pickle white or pastel stains.

                 

             

Lenmar fine wood finishes create a comprehensive wood finishing program. These systems are designed to offer a solution for every interior wood finishing application. Across several technology platforms, including production lacquers, acrylic systems, precatalyzed finishes, conversion varnishes, and waterborne systems, Lenmar offers a complete selection of clear and pigmented products in a variety of sheens and quality levels.

Lenmar’s floor stains, finishes and sealers provide an easy to maintain look that will last for years. Lenmar is committed to offering the professional floor finisher products that are durable and easy to apply, while remaining environmentally compliant. Formulated for commercial or residential applications, in solvent-based or waterborne systems, Lenmar offers a complete line to meet your needs.

 Lenmar 350 Voc Polyurethan is an OTC compliant, oil modified urethane floor finish that has been designed for the professional hardwood floor refinisher for use in both commercial and residential applications. Its primary benefits include: a self-levelingh finish, an exeptional amount of solids for maximum build, and a tough durable film that helps resist household chemicals, marring, and scuffing when fully cured.

   

Lenmar's QuickStain Alkyd Wiping Stains are an ideal solution for obtaining rich warm colors. They are ideal for use on wood furniture, cabinets, doors, paneling, trim, or any other interior wood surface. The carefully chosen selection of colors offers an easy  method for archieving color harmony with existing finishes. Also the stains are both intermixable and capable of being tinted, so an unlimited series of colors may be achieved.

Lenmar's UltraLaq 1D.33X Series products are pre-catalyed nitrocellulose lacquers designed for professional woodworkers who demand maximum performance in a high solids, ready-to-spray finish. These products are formulated to be used as a shelf-stable precat, with 12 months of shelf life.

Lenmar's 1M.430X MegaVar series of non-yellowing, high solids, conversion varnish is designed for the professional woodworker who demands maximum performance and clarity in a finish. Once catalyzed, this fast drying, VOC & HAPS comliant varnish offers superior protection against moisture and household chemicals. The high solids formula builds to a beautiful and exceptionally durable film that will fully cure within 2 - 5 days after final coat. The varnish requires the addition of 4 ounces of 1A.622B Catalyst (3%) per single gallon. As the catalyst is incorporating into the system, a chemical reaction begins that cross-links the molecules withing the film together upon application. Only catalyze enough varnish that will be applied in an 8 -12 hour period. This conversion varnish is recommended as a self-sealing finish over properly prepared interior wood surfaces. For those application requirements where high build is desired, use Lenmar's Mega Var Plus 1M.5300 series conversion varnishes.

v